Table of Content

• Metalizer
• How thick can I apply Plasti Dip?
• What is Plasti Dip?
• Can I add colorant to the Plasti Dip and make a custom color?
• Size and Application Option

Applying High Gloss Top Coat over Plasti Dip Spray colors can cause some dulling when combination is applied over cast vinyl. Flexible, specialty rubber coating ideal for repairing rusted or damaged dishwasher racks and other vinyl-coated racks. Dipping and removing too quickly can cause this. Remove at a rate of 1” every 5 seconds.

Unique among Plasti Dip varieties, Plasti Dip Smoke’s color changes gradually as more coats are added. After one or two coats, it’s a light, smoky gray. Each additional coat gives Plasti Dip Smoke a darker, deeper hue—from gray to charcoal to black, all with the same distinct smokiness. Plasti Dip Enhancers are formulated to bond with the unique chemical structure of cured Plasti Dip for superior adhesion and long life. Plasti Dip Enhancers are not recommended for use on any other surface. Satinizer and Glossifier are especially recommended for use with Plasti Dip Blaze products to keep the color’s vibrancy.

Metalizer

If experiencing runs or sags when spraying, move can further away from the surface and apply a lighter coat. Sagging and dripping can also be caused by high humidity, high temperatures, windy conditions, or direct sunlight. Ideal conditions are low humidity, 70 degrees, little to no air movement in a well-ventilated area. Yes, the Plasti Dip Enhancer in the Glossifier™ formulation provides a glossy finish on cured Plasti Dipped items.

Must be used in a well-ventilated area. Create a glow-in-the-dark look by adding our Glow colors on top of Plasti Dip White spray. Clear high-strength leather and vinyl repair designed to mend small rips, tears and holes in most types of vinyl and leather materials. Join our online community to get the latest news, product announcements, dip tips, videos, and more!

How thick can I apply Plasti Dip?

Hold can 12-16” from surface, moving can back and forth slightly overlapping each stroke. Apply heavy enough to produce an even, wet appearance. To improve adhesion, apply Plasti Dip Primer on metal surfaces before applying Plasti Dip. Plasti Dip High Gloss Top Coat adds Fadebuster™ protection and a lustrous finish over any Plasti Dip color. Plasti Dip Glossifier adds Fadebuster™ protection and a glossy, polished shine over any Plasti Dip color. All surfaces to be coated must be free of oils, grease, dirt, wax, and loose rust.

Also, allow each coat to fully dry before applying more product. Mix thoroughly before each use and refill. Apply additional coats as needed. Use naphtha, xylene or toluene for cleanup.

What is Plasti Dip?

Keep spray gun 6-8 inches away from surface, applying wet over lapping coats. Allow 30 minutes dry time before applying additional coats if needed. Refill spray system frequently. Avoid running empty which can draw air into spray system. Allow 10 – 20 minutes dry time before applying additional coats if needed. Always protect surrounding areas from overspray.

Your local hardware, home center, or paint store may also sell tubes of tinting colors. Add approximately 1/3 of a 1 oz. Liquid can will cover approximately 5 sq. The Create Your Color Kit comes with one 22 oz.

Is Plasti Dip safe to use on children's toys, animal containment, and/or on kitchen utensils?

Plasti Dip Enhancers are specially designed to make our already outstanding Plasti Dip Colors even better. Our Enhancers are easy to use and will give any Plasti Dipped item a unique look. Plasti Dip, whether in our original dip-on/brush-on formula or our aerosol variety, dries to a soft, satin finish. Use care when applying Plasti Dip Primer. Not intended for use with any other product.

Apply as many coats as desired. For best results, avoid direct sunlight, high humidity or breezy conditions. Plasti Dip Luxury Metal is a collection of nine luxurious, metallic colors styled after luxury vehicles. Each luscious color is infused with metallic specks, creating a cool, classy sparkle on anything you dip. Take your car from drab to fab and soak up the life of luxury.

For manufactuers, industrial users/professionals and industrial distributors, please visit PerformixCoatings.com. Apply using electric turbine style spray system or an HVLP spray gun with pressure pot system. Plasti Dip Luxury Metal is available in 11 oz. Plasti Dip Camo is a special collection of Plasti Dip colors designed to match the many shades of nature.

Seller cannot control use of this product and will not accept liability for more than product replacement. Most items being dip coated do not require priming because the coating is shrinking around the item as it dries. However, in extreme conditions or when adding protective coating to a large metal surface, primer is recommended. Use Plasti Dip Primer or a high quality acrylic auto body-type primer. Do not use Rust-Oleum® primer as it is not compatible.